INSPECT C bottle body photography inspection machine is a machine to detect the defects of bottle glass bottle on line. It mainly examines the stones, bubbles, silk, oil pollution, cracks, sags, rumors, folds and characters at the bottle.
Technical parameters:
Speed of machine
Test bottle type | Round bottle mainly, other bottle type provide sample test |
Bottle height | 35mm~350mm |
Bottle diameter | ≤120mm |
Bottle color | White; green; brown. |
air pressure | ≥0.75MPa |
Suitable for transmission line height | 700mm~1200mm |
Detection function | Opaque defect and stress |
Bottle spacing | ≥100mm |
≤300BRM |
Standard Test:
Check up and down of the bottle (12 cameras)
Stress test of bottle body (6 cameras)
Characteristic:
• automatic speed regulation of the bottle dividing device and self testing of the bottle.
High clear picture, high pixel.
Intelligent operation interface, touch screen operation.
The debugging operation is simple and the steps are few.
• identification of embossing, low leakage rate.
• defect recognition, and fewer false kicks.
• serious defect alarm.
• smart key functions to prevent misoperation
Physical specifications:
- power demand
AC220V single-phase power supply 50HZ 2.5KW
• gas demand
Minimum pressure of pressure: 3.5 bar (%) PSI)
Maximum pressure: 7 bar (100 PSI)
Maximum consumption: 0.8- 0.85 m3/min [20 to 30 cfm]
Temperature specification
Maximum value (no air conditioning):40 C [104 F]
Maximum value (air conditioning cooling):50 C [122 degree F]
Minimum value: 1 C [34 F]
Relative humidity: 95% (non condensing)
• speed of machine
Highest: 300 per minute
Note: the machine speed can be changed by the size and shape of the container.
• equipment size
(the adjustable range of the transmission line 700mm - 1200 mm)
Address: No. 577 Xinhua Avenue, Zhoucun District, Zibo, Shandong: 86-533-6181717
Copyright © Shandong Sanjin Glass Machinery Co., Ltd. all rights reserved, Lu ICP, No. 09074865.
